08 SEP 2025
Choosing woven flannel weight: what 150 g ±5 g means
Insight"150 g" on a flannel quotation means very little until you know three things: whether it is greige or finished weight, at what moisture regain it was measured, and how much tolerance the mill is allowed. Buyers who learn to ask those three questions stop receiving cloth that is 8% lighter than the sample they approved.
Why the tolerance exists at all
Cotton is hygroscopic. The same square metre weighs differently on a dry January morning than in the monsoon, and standard testing conditions exist precisely because of that. On top of moisture, dyeing and finishing change the weight: a piece-dyed dark shade picks up more dyeliquor and finishes heavier than a pale one from the same greige roll. That is why the honest way to quote flannel is a range rather than a single figure, and why our standard is written 150 g ±5 g.
How that plays out in practice
On a 150 g base, pale shades usually finish at 150–155 g/m² and dark shades at 155–160 g/m², because the darker the ground the more colour has to be carried. If a buyer needs a guaranteed minimum, we set the greige slightly heavier so the finished minimum holds — that costs a little more per metre, and it is the only way to promise a floor.
How a buyer should check it
The test is not difficult: a circular cutter of known area, a scale accurate to 0.01 g, five samples cut from different points across the width, conditioned before weighing. One sample proves nothing. Ask for the result, and ask which area the cutter was — a 100 cm² disc and a 1/100 yd² square give different numbers for the same cloth.
What goes in the contract
We write width, greige weight, finished weight range and the test method into the contract rather than leaving them in an email. If your customer's specification is 150 g with no tolerance, tell us at quotation, because that is a different commitment and a different price.
References & industry standards
These publicly verifiable third-party sources explain industry terminology and standards; they do not imply certification or endorsement.